Steve's blog
   


Steve About
Steve's blog,
The Words of the Sledge
steve@einval.com

Subscribe
Subscribe to the RSS feed.

Links

  • Home
  • Debian
  • PlanetDebian
  • Search PlanetDebian
  • Friends

  • Matthew Garrett
  • Jonathan McDowell
  • Jo McIntyre
  • Martin Michlmayr
  • Andrew Mobbs
  • Mike Pitt
  • Daniel Silverstone
  • Andy Simpkins
  • Neil Williams

  •        
    Wednesday, 08 April 2015

    More arm64 hardware for Debian - Applied Micro X-Gene

    As a follow-up to my post about bootstrapping arm64 in Debian, we've had more hardware given to Debian for us to use in porting and building packages for arm64. Applied Micro sent me an X-Gene development machine to set up and use. Unfortunately, the timing was unlucky and the machine sat on my desk unopened for a few weeks while I was on long holiday in Australia. Once I was back, I connected it up and got it working. Out of the box, a standard Jessie arm64 installation worked using network boot (dhcp and tftp). I ran through d-i as normal and installed a working system, then handed it over to the DSA and buildd folks to get the machine integrated into our systems. Easy! The machine is now up and running as arm-arm-03.debian.org and has been building packages for a few weeks now. You can see the stats here on the buildd.debian.org site.

    In terms of installation, I also got the machine to boot using one of our netinst images on a USB stick, but that path didn't get very far. The USB drivers for this hardware have only quite recently gone into the mainline kernel, and haven't been backported to the Debian Jessie kernel yet. I'm hoping to get those included shortly. There's also an option to replace the U-Boot firmware that came with the X-Gene with UEFI instead, which would be much more helpful for a server platform like this. I'll look into doing that upgrade soon too, but probably after the Jessie release is done. I don't want to jinx things just now. *grin*

    Thanks to APM for their generous donation here, and particularly to Richard Zenkert for his help in getting this machine shipped to us.

    17:09 :: # :: /debian/arm :: 0 comments